Customer pain points：
The workshop environment is poor with much noise, making it dangerous for workers to work there.
Manual loading and unloading process is not only inefficient, there is also a risk of injury to a human operator caused by the robot.
The fully automatic grinding equipment comprises the DOBOT CR series cobot, a set of loading assembly lines, a grinding head, a rotating mechanism, and an automatic sandpaper replacement mechanism to operate the complete automation of the product in loading, grinding, sandpaper replacement, and cutting. It operates the fully automatic grinding of the laptop backplane, from feeding, polishing, sandpaper replacement, and cutting. The whole process is automated. The CR robot is equipped with a double gripper at the end to pick the semi-finished products according to the signal. The feeding system sends the signal, then the robot arm moves to the grinding equipment to remove the already polished product, put it in the semi-finished product, and finally place the finished product back into the cutting area.
Cobots help to free the workers to reduce the risk of injury in metal processing equipment.
Cobots complete a set of loading and unloading tasks at once, 10 seconds faster than manual operation.
The maximum range of the CR robotic arm covers 620-1700 mm. Various robotic arms are flexible in the loading and unloading process.
Robotic accessories are open and support the fast access of different end tools.
DOBOT strives to meet and exceed requirements of our customers.
Please fill in the form below to help you double automation efficiency.
Apply For The Prototype